Cara Memperbaiki "Setup was unable to create a new system partition or locate an existing system partition" Sebelum menginstall Windows 7(8, 8.1, Vista, etc) from USB or DVD, etc

Oke di sini saya akan menjelaskan bagaimana cara memperbaiki "Setup was unable to create a new system partition or locate an existing system partition" , saya disini sebenernya bukan trik saya sendiri tetapi saya mendapatkan cara ini dari sumber" terntentu dan sumber yang berhasil : http://druss.co/ ,,

dan ternyata sumber yang berhasil di coba adalah cara ini :

If you try to install any version of Windows from USB falsh drive you may got this error: “Setup was unable to create a new system partition or locate an existing system partition”

I have already found tricky solution for Windows 7 but it didn’t help me with Windows 8.1.

So I have found another solution that will be suitable for any Windows version.

Basically you just need to copy all installation files from USB flash drive to your HDD (or SDD) drive and make it bootable, and then continue installation from HDD to HDD

Step by step instruction:

1.     Boot windows installation from USB drive

2.     Press Shift+F10

3.     In console type diskpart.exe and press enter. In this program execute following:

1.     select disk=0. Disk 0 is your destination drive, so be careful, all information on this drive will be removed.

2.     create partition primary size=xxx, where xxx – is the size of new partition

3.     select partition=1

4.     active

5.     format fs=ntfs quick

6.     assign

7.     exit, now you have bootable drive C

4.     Navigate to USB flash drive, in my case: cd d:

5.     Copy all files from USB drive to C: drive: xcopy d: c: /e /h /k

6.     Go to boot folder: cd boot

7.     Make you C: drive bootable with following command: bootsect /nt60 c:

8.     Put off USB drive from computer and restart them.

9.     Install Windows

10. Remove unnecessary menu item from bootscreen:

1.     Run cmd.exe as Administrator

2.     See boot menu list bcdedit

3.     Find Windows Setup&Recovery and copy identifier (codenya saja)

4.     Run bcdedit /delete {identifier(codenya)}

11. PROFIT!

Oh iya saya lupa ngasih tau kalo gagal gimana ...

sebelumnya minta maaf nih gan kalo gagal , Wayahna ya guys , harus searching / oprak oprek sendiri aja .. sebenernya saya juga ga sama kyak yang di atas , tapi saya mengoprek" "DISKPART,CMD,EXE,SELECT,CREATE" hanya itu ga sampai semuanya ..

btw sekian dulu ..

Semoga bermanfaat , terima kasih sudah mampir ^_^